High Vacum Transformer(semi Mobile) Oil Conditioning Plan

Модель : High Vacum Transformer(semi mobile) Oil Conditioning Plant
FOB Цена : Получить Последнюю Цену

Описание Продукта

To obtain optimum and best performance, it requires high quality and purity of insulating oil during the time of use.

To obtain optimum and best performance, it requires high quality and purity of insulating oil during the time of use. To avoid increasing voltage and greater electrical stress, oil with good di-electric qualities and minimum residual moisture (water) content in oil should always be maintained.

Contaminated oil tends to lose its characteristics of di-electric strength, resistivity and loss factor.

General Assembly

The oil conditioning plant will be mounted on a compact under carriage with suspension springs and two pneumatic tyres with a tow bar to hitch the plant to a towing vehicle for towing the plant over motarable roads.

All the components are neatly and compactly arranged with adequate space. The complete plant is provided with a sheet metal casing with necessary doors providing access to all controls and is suitable for outdoor operations under all weather conditions.

All the components will conform to relevant IS standards or equivalent International Standards and in the absence of any such standards the components will be of good engineering design and of good workmanship and quality.

The filtration plant will consist of the following:

Preliminary magnetic strainer
Inlet feed gear pump
Thermostatically controlled electric heaters
Filter vessel with filter cartridges
Degassing chamber
Vacuum pump/s
Optical level monitor to control foam/oil level in degassing chamber
Outlet centrifugal glandless pump
Set of valves for inlet, outlet, non-return, bypass, sampling, etc.,
Vacuum gauge, temperature gauge, compound (pressure vacuum) gauge, etc.,
Control panel consisting of control of various motors, heaters, vacuum gauges, etc.,

Preliminary Magnetic Strainer:
The plant will be provided with a suitable magnetic strainer at the inlet of the gear pump with necessary wire mesh perforated core to arrest all coarse particles. Provision is made to clean the strainer element without dismantling the complete strainer from the pipeline.

Inlet feed gear pump:
The inlet feed pump provided will be positive displacement type gear pump and has a built-in pressure relief valve to take care of any accidental pressure raises at the delivery side of the pump. A separate bypass valve is provided across the gear pump, so that the flow through the filter can be adjusted as required.

Heaters/Heater vessel:
The heater tank will be of MS welded construction. The vessel is completely leak proof and is suitable for high vacuum and pressure application.

The electric heaters provided have an adequate capacity to heat the oil from the ambient temperature to the required oil conditioning temperature upto 60 deg. C.

The heater vessel is designed in such a way that a generously dimensioned heat transfer surface area is provided. This generous design affords a very low specific heat load of the order of < 2.0 Watts/sq. cm.

Контактная Информация

Контактное Лицо Ms. Yolanda Lei (Manager)
Компания Chongqing Zhongneng Oil Purifier Manufacture Co., Ltd
Адрес
No.101 Huoju Street, Jiulong Industrial Park, Jiulongpo District, Chongqing, China
Zip/Почтовый 400039
Телефон 0086-23-68060921
Факс 0086-23-68060921
Мобильный 0086-13527390908